Changing Pre-Set Options - Fisher & Paykel FabricSmart WA8060P User Manual

Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which can be altered:
The wash temperatures, including changing the 'Cold' wash temperature to
1
'Controlled Cold'.
The out of balance recovery routine.
2
The number of beeps at the end of the cycle.
3
Resetting to factory default settings.
4
To enter Option Adjustment mode
Turn the washer on at the wall but do not touch 'Power'
1
Touch and hold the
2
3 seconds. You will hear 3 quick beeps indicating you
have entered Option Adjustment mode. The washer will
show the default setting for the 'Cold' wash temperature.
The diagram on page 29 shows how the wash cycle
● ●
icons relate to the options you can change.
The 'Changing pre-set options' section explains the
● ●
different options in more detail.
Use the dial and buttons on the panel to make your
3
changes to the pre-set options.
Touch 'Power'
4
will automatically remember your changes.
To change or reset any of the options, repeat the above
steps.
28

CHANGING PRE-SET OPTIONS

and buttons together for
to return to normal mode. Your washer
.
Entering Option
Adjustment mode