Table of Contents
Advertisement
MAINTENANCE SCHEDULE
Check coolant level and check for leaks 1)
Clean Seawater strainer
Check for Exhaust system leaks
Check for Fuel system leaks
Check the engine oil level and check for
leaks
Check the battery operating voltage
Check the oil level and check the steering
system for leaks
Check transmission lubrication level and the
2)
propulsion system
for leaks
3)
Engine oil and filter
Check the sacrificial anodes
system
Check hose clamps for tightness and
corrosion
Check the electrical system for tight
connections
Check tightness of the bolts, nuts and other
fasteners
Fuel filter and water separator
Air filter
Drive belt
Heat exchanger tube bundle
Inter-cooler tube bundle
Checking Inter-cooler automatic drain valve
Replace the seawater pump impeller
Turbocharger
1) Replace the coolant every two years.
2) For detailed propulsion system information, refer to the manufacturer's manual.
3) Replace the engine oil after the first 100 hours of operation.
INSTALLATION & OPERATION MANUAL
Q-engine Series
○ : Check/Clean, ◇ : Check (Replace if Necessary),
Daily
○
○
○
○
○
○
○
○
1)
Anti corrosion
YOU SHOULD EXERCISE THE UTMOST CARE TO PREVENT INJURY
TO YOURSELF OR ENGINE DAMAGE WHENEVER PERFORMING
ANY MAINTENANCE OPERATIONS.
250h
600h
●
●
◇
◇
◇
●
◇
●
◇
●
◇
◇
◇
◇
◇
CAUTION
- 87 -
● : Replace
Minimun 1 y
1000h
/Necessary
◇
◇
◇
◇
◇
◇
◇
◇
◇
◇
◇
●
◇
◇
◇
Advertisement
Table of Contents
