TILT
ADJUSTMENT
HOLES
Dash
~.Vent
o
/HOOKED
~ ~
Dash
__.Vent
.----
"
Louver
3
Push the Vent Mount onto the vehicle vent as shown
(1)
until it
hooks on the rear of the vent louver (2).
4
Rest the foot against the bottom of the vent (2), and adjust the
tilt of the Vent Mount by repositioning the foot to a different
adjustment hole (3).
PUSH • • • •
To remove the Vent Mount, push the mount into the vent. Then lift up until
disengaged from the rear of the vent louver, and remove the Vent Mount.