Sirius Satellite Radio Xpress RCi User Manual page 128

Installinq the Vent Mount:
Vent Mount
Option 5
Option 4
-
---,...
Replace End Cap
.....
Slide Extended Vent Clamps In
1 Locate a suitable vent in your vehicle which is strong enough to
hold the Xpress
RCi
and the PowerConnect Vehicle Dock. (Options 4
or 5.)
2 If the vent louvers are recessed, you'll have to use the extended
vent clamps. The Vent Mount is assembled with the short vent
clamps, so you will have to remove the short clamps and install
the extended clamps as shown below.
Remove End Cap Slide Short Vent Clamps Out
3 Push the Vent Mount onto the vehicle vent as shown
(1)
until
hooked on the rear of the vent louver (2).
4 Rest the foot against the bottom of the vent (2). If necessary,
adjust the tilt of the Vent Mount by repositioning the foot to a
different tilt adjustment hole (3).
CD CD CD
PUSH • • • •
Vent
Dash
IlJJr;==::::=J;~~/
HOOKED
Vent