Troubleshooting - Canon Vixia HG20 Instruction Manual

Trouble?

Troubleshooting

If you have a problem with your camcorder, refer to this section. Sometimes what you
think is a malfunction of the camcorder may have the simplest of solutions - please
read the "CHECK THIS FIRST" box before going on to the more detailed problems
and solutions. Consult your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power supply
Is the battery charged? Is the compact power adapter correctly connected to the
camcorder? (
Recording
Did you turn the camcorder on and set the mode dial to
on a memory card, is one correctly inserted into the camcorder? (
Playback
Did you turn the camcorder on and set the mode dial to
back recordings from a memory card, is one correctly inserted into the camcorder?
( 32) Does it contain any recordings?
Power source
The camcorder will not turn on or it turns off by itself.
- The battery pack is exhausted. Replace or charge the battery pack (
- Remove the battery pack and reattach it correctly.
Cannot charge the battery pack.
- Make sure the camcorder is off so charging can start.
- The battery pack is too hot. Charging will start once the battery pack temperature is below 40 °C (104 °F).
- Charge the battery pack in temperatures between 0 °C and 40 °C (32 °F and 104 °F).
- The battery pack is damaged. Use a different battery pack.
A noise can be heard from the compact power adapter.
- A faint sound can be heard while the compact power adapter is connected to a power outlet. This is not a
malfunction.
After using the camcorder for a long time, it becomes hot.
- This is not a malfunction. Turn off the camcorder and let it cool down before resuming use.
The battery pack is exhausted extremely quickly even at normal temperatures.
- The battery may have reached the end of its battery life. Buy a new battery pack.
Downloaded From VideoCamera-Manual.com Manuals
23)
or ? If you are recording
32)
or ? If you are playing
23).
101