Canon Vixia HG20 Instruction Manual page 25

1
Press the tab in the direction of
the arrow and pull out the battery
holder.
2
Place the lithium button battery
with the + side facing up.
3
Insert the battery holder.
T
O USE THE WIRELESS CONTROLLER
Point the wireless controller at the
camcorder's remote sensor when
you press the buttons.
You can rotate the LCD panel 180
degrees to use the wireless controller
from the front of the camcorder.
NOTES
• The wireless controller may not work
properly when the remote sensor is
situated under strong light sources or
direct sunlight.
Downloaded From VideoCamera-Manual.com Manuals
• If the wireless controller does not work,
check that
Control] is not set to [
( 98). Otherwise, replace the battery.
Accessories
Fasten the grip belt.
Adjust the grip belt so that you can reach
the zoom lever with your index finger, and
the button with your thumb.
Start/Stop
T
O ATTACH A SHOULDER STRAP
Pass the ends of the shoulder strap
through the strap mount on the grip
belt and adjust the length of the
strap.
[Wireless Remote
Off ]
25