Fisher & Paykel RS90A User Manual page 21

wATER fILTER – ICE & wATER MODELS
To reset the filter change icon
We recommend the water filter be used from the time of installation, and the change
filter icon be reset only when a replacement is installed. Do not reset the change filter
icon before the filter is changed or the filter monitoring will be inaccurate.
To reset, press and
● ●
The filter icon on the internal control panel and external display will no longer
● ●
illuminate.
To disable the filter change icon
If the change filter icon is disabled you will not be reminded of when to next change
your filter cartridge. We only recommend disabling this function when no filter cartridge
is fitted.
To disable, press
● ●
We recommend that you do not disable the filter change icon if you have a filter
● ●
cartridge fitted to the connection.
ImpoRtant!
The rate of water flow through the water dispenser can slow down as the filter
● ●
cartridge accumulates any sediment which may be present in the water supplied to
your home. This varies depending upon your local water quality, which may require
your filter cartridge to be changed more frequently.
In cases of excessively reduced filter life we recommend that you consult a local
● ●
plumber or your water supplier for advice on suitable filtration requirements for the
water supplied to your home.
filter replacement is the consumer's responsibility and will not be covered by the
● ●
Manufacturer's warranty except in the case of faulty parts or materials within the filter
cartridge.
If the water has not been dispensed for some time or water has an unpleasant taste or
● ●
odour, flush system by dispensing 4 litres of water.
If unpleasant taste or odour persists, you may wish to fit a new filter cartridge.
● ●
buttons for 4 seconds on the internal control panel.
, and buttons for 4 seconds.
19