Or, check out our FAQ section for answers to common questions. Limited Warranty The RemoteMix x5 is covered by a 2 year warranty to be free from defective workmanship and materials. To obtain service, contact JK Audio by phone or e-mail for return authorization.
Contents Overview Getting to know your RemoteMix x5™ 2 Controls & Indicators 4 Inputs & Outputs FAQs Technical Information Contents...
Page 4
Individual Source Selector and Hot-Swappable Dual 9-Volt Batteries Level Controls 100-240 VAC External AC ¼” Headphone Cue Input Power Supply In the Box Universal Power supply with 3.5 mm 4-conductor Wireless Interface Cable detachable cord USB Interface Cable RemoteMix x5™ Field Mixer...
Overview Introducing the RemoteMix x5™ RMx5™ combines a five-channel field mixer with a four-channel headphone amplifier. After all, what good is a field mixer if you do not have a flexible monitoring capability for the whole crew? Great Sound – Four low-noise, high-headroom, active-balanced mic inputs feature extremely high common mode rejection for outstanding cable noise immunity.
Getting to Know Your RemoteMix x5 Controls & Indicators Mic Level and Channel Controls Each of the four XLR inputs has a level control knob with a separate red <Peak> LED to indicate clipping on each channel. If you see more than an occasional flash of the <Peak>...
You should keep in mind that your wireless telephone also has level control. If you are having level problems that cannot be corrected with the controls on the RemoteMix x5, try adjusting the level on the wireless telephone itself.
Getting to Know Your RemoteMix x5 Inputs & Outputs Mic Inputs 1 and 2 Balanced XLR jacks with low-noise pre-amplifiers. Mic Inputs 3 and 4 Balanced XLR jacks with low-noise pre-amplifiers. A <Mic/Line> selector switch adds a 40 dB pad for a line level balanced input.
Page 9
AC to DC adapter to power RemoteMix x5 when AC power is available. Simply plug it into the back of RemoteMix x5 and plug the transformer into a wall outlet. This is a switching power supply so you can connect to a 110 or 220 VAC power source.
The noise from these particular telephones will be unacceptable for most broadcast applications. RemoteMix x5 is supplied with a 1/4” TRS to 3.5mm TRRS interface cable. While the majority of current wireless phones use a 4 conductor, 3.5mm TRRS headset jack, some older phones use a 2.5mm TRS headset jack.
Page 11
No. You may use rechargeable batteries, but you must remove and recharge the batteries outside of the RemoteMix x5. 8) I have lost my power supply for my RemoteMix x5 unit. I have a power supply that fits from a different product. Can I...
JK Audio, Inc. Manufacturer’s Address: 1311 E 6 Street Sandwich, Illinois 60548 USA Declares that the product: Product Name: RemoteMix x5 Field Mixer Model Numbers: RemoteMix x5 Conforms to the following Product Specifications: Safety: AS/NZS 60950.1:2003 CAN/CSA-C22.2 No. 60950-01-03 UL Standard 60950-01 1st edition ESD: EN 55024:1998;...
Page 15
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Changes or modifications not expressly approved by JK Audio can void the user’s authority to operate the equipment. FCC Complaince Notice...