Functions; Playback - Magnavox MWD200GA Owner's Manual

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any
other equipments which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
( )
⇒
Page 10
1 Press [STANDBY-ON] to turn on
the DVD/CD Player.
2 Press [OPEN / CLOSE A] and
insert a disc with label facing up.
3 Press [PLAY B] to start playback.
4 Press [STOP C] to stop playback.
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen.
Press [PLAY B], playback will resume from
the point at which playback was stopped.
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information will be kept even when unit is in standby
mode. For MP3, playback will resume from the beginning of the
track at which playback was stopped.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
E6C0SUD.indd 9 E6C0SUD.indd 9

Functions

2
2
STANDBY-ON OPEN/CLOSE
Hint
SEARCH
1 DISPLAY MODE
• When you play an MP3-format disc, details on page 10.
AUDIO
1 2 3
• A "prohibited icon" may appear at the top-right on the TV screen
SUBTITLE
6 when the operation is prohibited by the disc or this unit.
4 5
ANGLE
• Some DVDs may start playback from title 2 or 3 due to specific programs.
9
7 8
REPEAT CLEAR
• During the playback of a two-layered disc, pictures may stop for a moment. This happens
0 +10
while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
A-B PAUSE SKIP
3
SLOW
PLAY TIP:
REV FWD
4
STOP You can change the On-Screen language in "PLAYER MENU"
setting. (Refer to page 14.)
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly
during playback to select the required
forward or reverse speed.
To continue playback, press [PLAY B].
Hint
• Fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and
5(x32).
Slow Forward Search
Press [FWD g] repeatedly in the pause
mode to select the required forward speed.
To continue playback, press [PLAY B].
Hint
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 5(1/2).
R.STOP
• Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 14-15.)
• The reverse of slow playback is not available.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x3, x4, x1/2 or OFF.
x2
PAUSE
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select
OFF.
Hint
• Zooming function does not work while the disc menu is displayed.
• Some part of the picture may not be zoomed depending on the
disc or playback status.
– 9 –
Lights up when power is on.
OPEN/
CLOSE
2 2
x3 x4 x1/2
PLAY STOP
IR
3 4 1
1
E
1
EN
2006/07/06 12:05:40 2006/07/06 12:05:40