Display Setting; Audio Setting - Magnavox MWD200GA Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 2 on page 14.
3
Select the desired item.
ENTER
DISPLAY menu
DISPLAY_TV ASPECT
TV ASPECT 4:3 LETTER BOX
STILL MODE 4:3 PAN & SCAN
16:9 WIDE
Hint
TV ASPECT:
• Select "4:3 LETTER BOX", so
that black bars may appear on
the top and bottom of the screen.
• Select "4:3 PAN & SCAN" for
a full height picture with both
sides adjusted.
• Select "16:9 WIDE" if a wide
screen TV is connected to this unit.
C

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
2 on page 14.
3
Select the desired item.
ENTER
AUDIO menu
AUDIO_DRC
DRC ON
DOWN SAMPLING OFF
DOLBY DIGITAL
E6C0SUD.indd 15 E6C0SUD.indd 15
4
TV ASPECT: (Default: 4:3 LETTER BOX)
See Hint on the left.
DISPLAY_TV ASPECT
TV ASPECT 4:3 LETTER BOX 4:3 LETTER BOX
STILL MODE 4:3 PAN & SCAN 4:3 PAN & SCAN
16:9 WIDE 16:9 WIDE
ENTER ENTER ENTER
STILL MODE: (Default: AUTO)
See Hint on the right.
DISPLAY_STILL MODE
TV ASPECT AUTO AUTO
STILL MODE FIELD FIELD
FRAME FRAME
ENTER ENTER ENTER
4
DRC (Dynamic Range Control): (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
AUDIO_DRC
DRC ON ON
DOWN SAMPLING OFF OFF
DOLBY DIGITAL
ENTER ENTER ENTER
DOWN SAMPLING: (Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
AUDIO_DOWN SAMPLING
DRC ON ON
DOWN SAMPLING OFF OFF
DOLBY DIGITAL
ENTER ENTER ENTER
DOLBY DIGITAL: (Default: BITSTREAM)
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL
DRC BITSTREAM BITSTREAM
DOWN SAMPLING PCM PCM
DOLBY DIGITAL
ENTER ENTER ENTER
– 15 –
5
To exit the menu
Select the
desired
ENTER ENTER ENTER
setting.
Hint
ENTER
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO",
automatically select the
best resolution setting
(FRAME or FIELD) based
on the data characteristics
Select the
of the pictures. (default).
desired
• If you select "FIELD",
setting. ENTER ENTER ENTER
the picture in the still
mode will be stabilized.
ENTER
• If you select "FRAME", the
picture in the still mode
will be highly defined.
• An individual picture
on the TV screen is
called a "frame", which
consists of two separate
images called a "field".
• Some pictures may be
blurred if you select
"AUTO" in the still
mode due to their data
characteristics.
5
To exit the menu
Select the
desired
ENTER ENTER ENTER
setting. Hint
DRC:
ENTER
• This function is
available only on
the discs which are
recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection,
Select the
the sound will be down
desired
ENTER ENTER ENTER
setting. sampled at 48kHz, even
if you set to "OFF".
ENTER
Select the
desired
ENTER ENTER ENTER
setting.
ENTER
SETUP
SETUP
EN
2006/07/06 12:05:45 2006/07/06 12:05:45