Getting Started; Using The Chopper - Electrolux ESTM9804S Instruction Manual

Getting started

EN
(F)
1. Before first use, clean the mixing
foot (F) under running water, Before
inserting or removing the mixing foot
(F), remove the plug from the mains
outlet.

Using the chopper

1. Place the chopper bowl (M) on a
clean, level surface. Put the chopping
blade (N) into the shaft at the base of
the chopper bowl (M).
4
2. Insert the mixing foot (F) to the
handheld part (E).
Turn the handheld part (E) clockwise
to lock into position.
To disassemble, turn the handheld
part (E) anti-clockwise.
CAUTION! Allow the mixing foot
to cool down after processing hot
ingredients or liquid.
Press and hold the ON/OFF or
TURBO button to start mixing.
Adjust the normal speed, by moving
the speed selector left (for a lower
speed) or right (for a higher speed).
Release the ON/OFF or TURBO button
to stop mixing.
(N)
(M)
2. Place food into the chopper bowl
(M). Amount of food to be chopped
cannot exceed 300 g. Close the
chopper bowl lid (L).
(E)
(F)
3. Insert the stick mixer deep into
(L)
(M)
3. Insert the handheld part (E) into the
a bowl or a pan, begin mixing by
starting at normal speed. Do not
immerse the mixing foot (F) more
than 2/3 of its length. Move the stick
mixer lightly up and down to ensure
best processing of content. Release
the ON/OFF or TURBO button to stop
mixing.
(E)
(L)
(M)
chopper bowl lid (L).
Turn the handheld part (E) clockwise
to lock into position.
To disassemble, turn the handheld
part (E) anti-clockwise.