Security Command XR20 Executive Series User Manual page 39

PERIM ALL
ARMING AND DISARMING AN ALL/PERIMETER SYSTEM
or
DISARM?
Press COMMAND. The keypad displays PERIM ALL (when arming) or DISARM?. Select the option.
The keypad displays ENTER CODE: -.
Present your card to the reader. Once the system validates the card, if you choose PERIM only the
perimeter arms. If you choose ALL, both areas arm. If programmed on a 32-character keypad, ALL
is automatically chosen for you after a short delay. All armed areas disarm automatically.
ARMING AND DISARMING A HOME/AWAY SYSTEM
ABC SECURITY
Present your card to the reader. If the system is armed, once the system validates the ARM DISARM
card, all areas are disarmed.
If the system is disarmed when you present your card, once the system validates the
card, all areas are armed in the AWAY mode.
ENTRY DELAY
All Systems - Once the protected door is opened and the entry
ABC SECURITY
delay starts, the keypad displays ENTER CODE: - . Present your
ENTER CODE: –
card to the reader and, once validated, the system disarms all
areas and activates the Door Strike relay. The top line of 32-
character keypads displays the zone name. Area systems provide
a delay to allow selected areas only to be disarmed. See Arming
and Disarming on the previous page.
Using the access reader for user menu access
You can also use a card reader to access the User Menu when
MENU? NO YES displays.
Appendix XR20 User's Guide 35