Silencing An Alarm - Security Command XR20 Executive Series User Manual

Silencing an Alarm

All/Perimeter and Home/Away Systems
While the alarm bell or siren is sounding, enter your user code. The keypad displays
DISARM SILENCE.
Select SILENCE to stop the bell or siren. This does NOT disarm the system.
Area System
While the alarm bell or siren is sounding, enter your user code. The system silences the alarm
bell or siren.
If your system is programmed to send an Abort (alarm cancel) report to the central station,
the keypad displays ALARM CANCELLED the next time the panel is disarmed, if it is disarmed
before the bell cutoff time expires.
What to do when a trouble tone is sounding
You can silence the trouble tone by pressing any key. This only silences the keypad and does not
correct the condition that originally caused the problem.
© 1999 - 2006 Digital Monitoring Products, Inc.
Information furnished by DMP is believed to be accurate and reliable.
This information is subject to change without notice.
The XR20 panel is UL listed for Grade A Household Service and Commercial Burglary Service.