Related Manuals for Luma LUM-600-DOM-A Series
Summary of Contents for Luma LUM-600-DOM-A Series
- Page 1 LUM-600-DOM-A Series HD-TVI Analog Surveillance Camera Installation & Operation Manual...
-
Page 2: Installation
Luma 600 Camera Manual Installation Before you start, ensure that the device is in good condition and all the assembly parts are included. Make sure that all equipment is powered off during installation. Ensure the wall is strong enough to withstand three times the weight of the camera and the mount. -
Page 3: Required Equipment
Luma 600 Camera Manual Overview Before installing, familiarize yourself with the parts of your camera. Power Cable Lens HD Video Cable CVBS Cable (do not use) Black Liner DIP Switch Video Base Test Port Dome Required Equipment Aside from the contents of this box, you will need to provide... -
Page 4: Prepare For Installation
Luma 600 Camera Manual Prepare for Installation 1. Drill a cable hole and pilot holes for your screws in the ceiling, using the supplied template shown. 2. Loosen the hex screws on the dome to remove the dome and the black liner. Locate the CVBS cable and... -
Page 5: Install The Camera
Luma 600 Camera Manual Install the Camera 3. Attach the base of the camera to the ceiling and secure it with screws. 4. Route the cables through the cable hole. Note that the base provides extra space between the camera and the ceiling for wire management. -
Page 6: Adjust The Camera
Luma 600 Camera Manual Adjust the Camera 1. Adjust the camera according to the figure below to get an optimum angle. This camera has a 3-axis gimbal for perfect pan and tilt control. 2. Adjust the camera’s zoom and focus. -
Page 7: Menu Operation
Luma 600 Camera Manual Menu Operation The in-camera menu is structured as follows: MENU Setup Video Out Language White Smart Day & Exposure Backlight Scene Lens Special Adjust Reset Exit Balance Focus Night Camera Sharp- Indoor Shutter 2DNR Factory Title... -
Page 8: Main Menu Items
Luma 600 Camera Manual Main Menu Items Most camera functions can be handled through the DVR’s control interface, however, you can access the camera’s internal menu directly for specific functions. To access this menu, first set the camera to the HIK-C (Coaxitron) protocol. -
Page 9: Setup Menu Items
Luma 600 Camera Manual Setup Menu Items Smart Focus Press Iris+ to have the camera test the view and make a recommended focus setting for varifocal lenses. It does not adjust the camera’s focus to that number; you must do it manually. Note: This camera has a fixed lens; its focus cannot be adjusted. - Page 10 Luma 600 Camera Manual Use the arrows to set the automatic gain control value from 0 (making the image darker in bright areas) to 15 (making the image brighter in dim areas). Sens-Up This grants your camera the ability to generate a color image at night by using ambient light. If the shutter is set to auto or 1/25, you can enable sens-up.
- Page 11 Luma 600 Camera Manual Position/Size: This option lets you use the defog effect on only a portion of the camera’s view. You first set the location of the upper left-hand corner of the area (defog defaults to full screen, so the first time you use this, you will not be able to move the area).
- Page 12 Luma 600 Camera Manual BLC (Backlight Compensation) This setting adjusts for areas where the backlight is strong. Its chief advantage is that you can apply it primarily to a select portion of the camera’s view (although, to preserve a natural look, it influences the appearance of the whole screen).
-
Page 13: White Balance
Luma 600 Camera Manual Level: Set the HSBLC level from 0 to 100; this determines how bright something must be for the camera to apply HSBLC to it. Lower levels mean more of the camera screen is affected; higher levels mean that only the brightest areas are affected. - Page 14 Luma 600 Camera Manual To edit noise reduction settings, press Iris+. 2DNR This uses image data alone to reduce noise. Use the arrow keys to turn this on or off. 3DNR This uses image data as evaluated over time to reduce noise. Use the arrow keys to turn this on or off. If this is on, press Iris+ to customize its settings.
- Page 15 Luma 600 Camera Manual legend is displayed at the bottom of the keyboard; the flashing underscore shows where the next letter will go (overwriting any letter currently there). The arrow icons shift the flashing underscore left and right. CLR erases all text. POS lets you position the text on the screen using the arrow keys.
- Page 16 Luma 600 Camera Manual Display: This item turns the selected area on or off. If the area is on, you can press Iris+ to adjust the location of the camera using the arrow keys (the area’s size is defined by its zoom). Press Iris+ to exit.
- Page 17 Luma 600 Camera Manual Motion View: When this setting is on, the camera view uses translucent red boxes to highlight areas where it detects motion. Default: Press Iris+ to restore the default settings for the size and location of the motion detection areas. This does not reset the sensitivity settings.
- Page 18 Luma 600 Camera Manual Default: Press Iris+ to restore the default settings for all areas. Return: Press Iris+ to go back to the previous menu. Defect This menu option corrects for digital defects (hot or stuck photosites, hotspots, amp noise, etc.).
- Page 19 Luma 600 Camera Manual Adjust Sharpness Adjust the sharpness of the camera image from 0 (unchanged) to 15 (highly sharpened). Monitor Select whether the monitor that is viewing the camera data is a CRT or LCD. Gamma (LCD only) / Black Level (CRT only): This adjusts the lightness or darkness of the image.
-
Page 20: Year Limited Warranty
SnapAV.com. 5-Year Limited Warranty This Luma Surveillance™ product has a 5-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.
Need help?
Do you have a question about the LUM-600-DOM-A Series and is the answer not in the manual?
Questions and answers