Subscribe to Our Youtube Channel
Related Manuals for Luma 100 series
Summary of Contents for Luma 100 series
- Page 1 100 Series Mini Dome 960H Analog Surveillance Camera with Microphone Installation & Operation Manual...
-
Page 2: Installation
Luma 100 Series Mini Dome Camera Installation Before you start, ensure that the device is in good condition and all the assembly parts are included. Make sure that all equipment is powered off during installation. Ensure the wall is strong enough to hold three times the weight of the camera and the mount. -
Page 3: Box Contents
Luma 100 Series Mini Dome Camera Box Contents Camera and mount Cover with dome Self-adhesive mounting template 2 x camera mount screws with anchors 4 x cover screws 3mm hex wrench Lens adjustment tool Other Required Equipment Aside from the contents of this box, you will need... - Page 4 Luma 100 Series Mini Dome Camera Overview Before installing, familiarize yourself with the parts of your camera. Camera and Mount Lens Adjustment Tool...
- Page 5 Luma 100 Series Mini Dome Camera Cover and Dome Power Cable (red) Video BNC Cable Audio (black) BNC Cable (white)
-
Page 6: Prepare For Installation
Luma 100 Series Mini Dome Camera Prepare for Installation 1. Drill a cable hole and pilot holes for your screws in the ceiling, using the supplied template. Ensure that the front of the template aims at the desired surveillance area. - Page 7 Luma 100 Series Mini Dome Camera 2. Remove the cover from the camera and mount. Route the cables through the cable hole. Screw the camera and mount into the ceiling.
-
Page 8: Install The Camera
Luma 100 Series Mini Dome Camera Install the Camera 3. Insert prongs of the lens adjustment tool into the holes on the front of the lens, as shown. - Page 9 Luma 100 Series Mini Dome Camera 4. Using the lens adjustment tool for leverage, orient the camera in the direction desired. To ensure a level picture, the infrared sensor (next to one of the prongs) should be down.
- Page 10 Luma 100 Series Mini Dome Camera 5. Connect the audio BNC cable to the matching Audio In port on the recorder. You must use the audio port that matches the number of the video port (they are not configurable). If you do not want to use the microphone, tape the BNC off to prevent accidental cross-connection.
- Page 11 Luma 100 Series Mini Dome Camera 7. Attach the cover and dome to the camera mount and secure it with screws. Connect the power, and video cables.
- Page 12 (RA) number. Contact technical support for an RA number. Copyright ©2015 by SnapAV. All rights reserved. SnapAV, Luma Surveillance, and all related marks and images are trademarks or registered trademarks of SnapAV. Version 151202-1311...
Need help?
Do you have a question about the 100 series and is the answer not in the manual?
Questions and answers