Luma 110 Series Quick Start Manual

110 series mini dome 1080p analog surveillance camera

Advertisement

Quick Links

110 Series Mini Dome
1080p Analog Surveillance Camera
Quick-Start
Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 110 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Luma 110 Series

  • Page 1 110 Series Mini Dome 1080p Analog Surveillance Camera Quick-Start Guide...
  • Page 2: Box Contents

    Luma 110 Series Mini Dome Camera Box Contents Camera and mount • DC 12V power adapter • Self-adhesive mounting template • 4 × camera mount screws with anchors • Extra desiccant pack • 2.5mm hex wrench • Other Required Equipment...
  • Page 3 Luma 110 Series Mini Dome Camera Inspection Before you start, ensure that the device is in good condition and all the assembly parts are included. Power off all equipment during installation. Ensure the wall is strong enough to hold three times the weight of the camera and the mount.
  • Page 4 Luma 110 Series Mini Dome Camera Overview Before installing, acquaint yourself with the parts of your camera. Camera Shroud Dome Lens Cover Infrared LEDs Light Sensor Power Barrel Cable Video BNC Cable...
  • Page 5: Prepare For Installation

    Luma 110 Series Mini Dome Camera Prepare for Installation 1. Drill a cable hole and pilot holes for your screws in the ceiling, using the supplied template. We recommend installing with RJ59 or RJ6 cabling with two-wire power (regular or siamese).
  • Page 6: Install The Camera

    Luma 110 Series Mini Dome Camera Install the Camera 3. Connect the cables, and route the cables through the hole. 4. Attach the base of the camera to the ceiling and secure it. 5. Gripping the side of the camera, rotate, angle, and spin the lens to get the orientation you desire.
  • Page 7 Luma 110 Series Mini Dome Camera Adjustments If you want to use the camera’s on-screen display through your DVR or the web interface, go into the DVR’s menu and set the camera protocol to UTC (Coaxitron). To do so from the DVR’s local interface, go to Settings >...
  • Page 8 5-Year Limited Warranty This Luma Surveillance™ product has a 5-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled.

Table of Contents