Kenwood NX-5700 User Manual page 54

GPS Data Storage
The GPS data is stored temporarily in the transceiver RAM at every GPS Storage
Interval from the GPS unit. The data will be written to the built-in memory and microSD
card when more than three pieces of data are collected. The stored GPS data in the
built-in memory can be sent from the transceiver via NXDN Air Protocol or can be
read on a PC.
Playback
You can play back the voice recordings recorded using Auto Recording.
1
Press the key programmed as [Playback] to enter Playback mode.
Alternatively, press the key programmed as [Menu] to enter Playback mode using the
Menu Mode.
The voice recordings are listed on the display.
●
2
Press the [J] and [K] keys to move up and down the list.
3
Press the [ ] key to play back.
After playing back a recording, the transceiver will automatically play the next recording
●
until the last recording on the list is played.
To pause or resume playback, press the [ ] key.
●
To skip to the next or previous recording, press the [H]/ [I] key. Press and hold the key
●
to fast-forward or rewind.
To delete a recording
o
①
Press the [ ] key while the list is displayed.
A confirmation message appears on the display.
●
②
Press the [ ] key to delete.
To delete all recordings
o
①
Press and hold the [
A confirmation message appears on the display.
●
②
Press the [ ] key to delete.
54
] key while the list is displayed.