Download Print this page

Ness Smartbell Installation Note

Flush mount outdoor phone (odp)

Hide thumbs Also See for Smartbell:

See also: Installer and User Manual

Flush Mount Outdoor Phone (ODP)

Face Panel

Note:

1. Do not connect the ODP to the customers LAN network. It must be connected direct to the Ness

Smartbell eGateway controller.

2. Remove the dust cap from the front of the camera before use.

3. Front cover is held in position with strong magnets. Once installed it should clip off with medium

force using a small flat blade screwdriver from the edge of the cover

4. Refer the Smartbell User Manual on the eGateway CD for Installation and programming details.

Ness Smartbell Flush Mount Outdoor Phone Unit (ODP)

Ness Smartbell

Main Unit

Mounting Box

Remove Dust Cap

Page 1

Table of Contents

Need help?

Do you have a question about the Smartbell and is the answer not in the manual?

Page 1 Face Panel Remove Dust Cap Note: 1. Do not connect the ODP to the customers LAN network. It must be connected direct to the Ness Smartbell eGateway controller. 2. Remove the dust cap from the front of the camera before use.
Page 2 LAN1 and LAN 2 ports on the eGateway, however external power supplies will be required to power these additional modules connected to LAN 1 & LAN 2 ports Ness Smartbell Flush Mount Outdoor Phone Unit (ODP) Page 2...