Sling Media Slingbox PRO User Manual page 7

Video info
Best quality.
A connection that
uses the set of
green, blue, and red
cables is called a
component
connection.
The connector
Component video
for the
cables carry no
HD Connect
sound, so they must
cable on the
be used with audio
cables.
back of the
Slingbox Pro.
To use a component
See the
connection with a
Slingbox PRO, you
important note
must purchase an
below.
optional Sling Media
HD Connect cable,
available from your
retailer.
The ports on the HD Connect cable
*IMPORTANT: This port on the Slingbox PRO is for the Slingbox HD Connect cable only. Its physical design
is not intended to accommodate an HDMI connection. To connect the Slingbox PRO to an HD source, use
an HD Connect cable, available separately from your retailer. For more information, go to our web site:
http://www.slingmedia.com
Use these ports and cables
The HD Connect
cable
*
Slingbox PRO • Page 7
Do this
A device with component video splits
the video signal into its three parts:
green, blue, and red.
1.
If you have available component
video ports on your video device,
connect one end of the component
video cables to your video device
and the other ends to the VIDEO IN
ports on your HD Connect cable.
2.
Connect another set of component
cables to the VIDEO OUT ports on
your HD Connect cable and then to
your TV.
Don't connect the yellow cable.
3.
Connect one end of the audio cables
to your video device and the other
to the AUDIO IN ports on your
HD Connect cable. Connect
another set of audio cables to the
AUDIO OUT ports and then to your
TV.
White is for left audio.
Red is for right audio.