Radio Frequency Interference Requirements - Canada; Laser Devices; Scanner Labeling - Symbol LS 4008i Manual

Q u i c k
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Marking and European Economic Area (EEA)
Statement of Compliance
Symbol Technologies, Inc., hereby declares that this device is in
compliance with all the applicable Directives, 89/336/EEC, 73/23/EEC. A
Declaration of Conformity may be obtained from http://
www2.symbol.com/doc/

Laser Devices

Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-
1:1993, EN60825-1:1994+A11:1996. The laser classification is marked on
one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.

Scanner Labeling

LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2
LUMIERE LASE-NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE 2. CAUTION-LASER LIGHT. DO NOT
STARE INTO BEAM. IEC CLASS 2 LASER PRODUCT 630-680 nM, 1.0 mW LASER
C A U T I O N
LASER LIGHT -DO NOT
STARE INTO BEAM
630-680nM LASER
1.0 mW MAX OUTPUT
CLASS II LASER PRODUCT
SYMBOL TECHNOLOGIES INC.
HOLTSVILLE , N.Y.
R e f e r e n c e
:
43