Zanussi ZWH 6100P User Manual page 14

Programme selector dial
1
Temperature button
2
95°
60°
40°
30°
Automatic Spin reduction and
3
Rinse Hold
AUTO
Super Quick
4
14
Turn the programme selector dial to the required programme. The selector
dial can be turned either clockwise or counter-clockwise. The green pilot
light of the button 6 starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 6 will flash 3
times to indicate a wrong selection. The appliance will not perform the new
selected programme.
• To switch the appliance off, turn the programme selector dial to the posi-
tion .
• To cancel or change a running programme, switch the appliance off by
turning the programme selector dial to the position
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 6 again. The water in the tub will
be not emptied out.
Push the temperature button to select the most suitable temperature for
washing your laundry .
: Cold wash.
By selecting a programme, the appliance proposes automatically the maxi-
mum spin speed provided for that programme.
By selecting Automatic Spin reduction the spin speed is reduced to a half,
but not less than 400 rpm. The relevant light (
Rinse Hold
By selecting this function the water of the last rinse is not emptied out to
prevent the fabrics from creasing. Before opening the door it will be neces-
sary to empty out the water.
To empty out the water, please read the paragraph «At the end of the pro-
gramme».
By pressing this button the corresponding pilot light illuminates.
Short cycle for lightly soiled items or for laundry which needs only freshen-
ing up.
With this option, a reduced load of laundry is recommended:
• Cottons 3,5 kg
• Synthetics and delicates 2 kg
. Select the new
) illuminates.