Saving And Transferring Schedules To Your Camera - Reconyx HyperFire User Manual

Saving and Transferring Schedules to Your Camera

When you have finished setting the trigger schedules for your camera, click
OK to save your changes and close the scheduling software or click Cancel
to close the scheduling software without saving your changes.
Your memory card now contains your camera's new schedules. The next
time you turn on your camera with this memory card inserted, your camera
will be programmed according to your customized changes and will display
"Saving Schedule" when powered on. After the camera reads the
configuration file and reprograms itself, it will delete the file so that you don't
inadvertently program another camera with these schedules at some later
date.
TIP: Programming multiple security cameras is made easy with the
scheduling software. Just create one configuration and save it to multiple
memory cards; one for each camera.
Note: Security model cameras and Professional model cameras use
different configurations and different software to program those
cameras. If you use the security configuration software, a professional
model camera will not be able to read the settings on the memory card.
Likewise, if you use the professional configuration software, a security
model camera will not be able to read the settings on the memory card.
Disclaimer
While every effort has been made to ensure that the information
contained in this "User Guide" is accurate and complete, no liability can
be accepted for any errors or omissions.
RECONYX reserves the right to change the specifications of the
hardware and software described herein at any time without prior
notice.
RECONYX makes no warranties for damages resulting from corrupted
or lost data due to a mistake in operation or malfunction of the camera,
the software, memory cards, personal computers, or peripheral device.
www.reconyx.com 4