Wiring Connection; Part List For Installation - Kenwood KDC-HD262U Instruction Manual

Wiring connection

Rear, front, subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
Fuse (10 A)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Gray
Light blue/yellow
Gray/Black
(Steering remote control
wire)
Green
Green/Black
Purple
Brown
Purple/Black
(Mute control wire)
Red (Ignition wire)
Yellow (Battery wire) Blue/White
(Power control wire/
Antenna control wire)
To the steering wheel remote
control adapter
To the terminal that is grounded
when the telephone rings or during
conversation ( 14)
(To connect the Kenwood navigation
system, refer your navigation
manual.)
To the power control terminal when
using the optional power amplifier
or to the antenna control terminal in
the vehicle
When connecting to an external
amplifier, connect its ground
wire to the car's chassis to avoid
damaging the unit.

Part list for installation

(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
17
ENGLISH