Advertisement
Wiring inSTrUCTiOnS
CAUTiON: Do not bypass or eliminate thermal cutout from the circuit.
CAUTiON: Check tightness of all electrical connections and wire nuts.
CAUTiON: Grounding connection is required.
LEGEND:
Thermal cutout
faCTOrY Wiring
Thermal cutout
Heating Element
RIGHT SIDE POWER CONNECTION
!
NOTE: When control accessories are installed, use wiring diagram supplied with the accessory. Following are examples of wiring diagrams with thermostat.
WITH SINGLE POLE THERMOSTAT
Ground
L1
L2 or N
CONNECTING MULTIPLE LINEAR CONvECTORS TOGETHER
1367 Industrial Road
Cambridge ON Canada N1R 7G8
1-888-346-7539
www.dimplex.com
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2011 Dimplex North America Limited
Heating element
L1
Line
L2 or N
Ground
For Right hand side connection use same logic
Ground
L1
Line
L2 or N
Ground
For Left hand side connection use same logic
GND
L1
L2 or N
Wire nut connection
Wire nut connection
Ground
Nameplate
LEFT SIDE POWER CONNECTION
WITH DOUBLE POLE THERMOSTAT
Load
Ground
L1
L2 or N
3
Advertisement
