Fujitsu fi-5900C Replacement Procedure page 15

C R
leaning the olleRs With the
The cleaning sheets are designed to remove only loose paper dust and ink
from the rollers. Use them approximately every 10,000 sheets scanned.
They are to be used in between the thorough cleanings of the scanner. Us-
ing the cleaning sheets does not take the place of the more complete
cleanings described later in this section
• Turn off the scanner.
• Access the Offline Feed Test by following the steps below.

Open the Pre-Imprinter Cover

While pressing the Scanner
s b , press the
Can utton
p b
oWeR utton
scanner on.
Note:
The scanner Function Number
Display will display the items
to the right.

Stop pressing the s
Can

Close the Pre-Imprinter Cover.
• Set the Hopper Guides to the
B4 width.
• Pull out the Stacker
Extension and adjust it to the
length of the cleaning sheet.
fi-5900C C
C s
leaning
to turn the
b .
utton
Stacker
Extension
R
onsumable eplaCement and
heets
Pre-Imprinter
Cover
C i
leaning nstRuCtions