Table of Contents
Advertisement
www.seagate.com
3.2
Electromagnetic and Environmental Specifications
The Nytro XP6500 card is designed to minimize electromagnetic emissions, susceptibility to radio frequency energy,
and the effects of electrostatic discharge. The card carries the CE mark, RCM, Canadian Compliance Statement, KCC,
Taiwan BSMI, Japan VCCI, and FCC Class B, and the card is marked with the FCC Self-Certification logo. The card also
meets the requirements of CISPR Class B.
3.3
Safety Characteristics
All Seagate PCIe boards meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked
with the supplier's name or trademark, type, and UL flammability rating. Because these boards are installed in a PCIe
bus slot, all voltages are below the SELV 42.4-V limit.
3.4
China Restriction of Hazardous Substances (RoHS)
Directive
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table
contains information mandated by China's "Marking Requirements for Control of Pollution Caused by
Electronic Information Products" Standard.
"O" indicates the hazardous and toxic substance content of the part (at the homogeneous material level) is lower than
the threshold defined by the China RoHS MCV Standard.
"X" indicates the hazardous and toxic substance content of the part (at the homogeneous material level) is over the
threshold defined by the China RoHS MCV Standard.
Seagate Nytro XP6500 Flash Accelerator Cards User Guide, Rev. B
Electromagnetic and Environmental Specifications
23
Advertisement
Table of Contents
