Vivotek CC8370-HV User Manual page 245

disablemdonptz
7.38 UART control
Group: uart (capability.nuart > 0 and capability.fisheye = 0)
NAME
ptzdrivers_i<0~19,
127>_name
ptzdrivers_i<0~19,
127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
paritybit
stopbit
uartmode
customdrvcmd_i<0~9>
speedlink_i<0~4>_name
speedlink_i<0~4>_cmd
ptzdriver
<boolean> 1/4
VALUE SECURITY
(get/set)
string[40] 1/4
string[128] 1/4
<boolean> 1/4
(capability.nuart > 0 and capability.fisheye = 0)
VALUE SECURITY
(get/set)
110,300,600,1200, 4/4
2400,3600,4800,72
00,9600,19200,384
00,57600,115200
5,6,7,8 4/4
none, 4/4
odd,
even
1,2 4/4
rs485, 4/4
rs232
string[128] 1/4
string[40] 1/4
string[40] 1/4
0~19, 1/4
127 (custom),
128 (no driver)
capability_ptzenable
d is 1
Disable motion detection on PTZ operation.
DESCRIPTION
Name of the PTZ driver.
Full path of the PTZ driver.
Enable HTTP tunnel channel to control UART.
DESCRIPTION
Set baud rate of COM port.
Data bits in a character frame.
For error checking.
1
2-1.5 , data bit is 5
2-2
RS485 or RS232.
PTZ command for custom camera.
Additional PTZ command name.
Additional PTZ command list.
The PTZ driver is used by this COM port.
VIVOTEK
User's Manual - 245