Vivotek CC8370-HV User Manual page 204

VIVOTEK
smartstream_supportmax
bitrate
vadp_supportfeature
vadp_npackage
thermal_support
thermal_temperaturedete
ction
camctrl_httptunnel
camctrl_privilege
uart_httptunnel
transmission_mode
network_wire
network_wireless
wireless_s802dot11b
wireless_s802dot11g
wireless_s802dot11n
204 - User's Manual
1Mbps,2Mbps,4Mbp 0/7
s,6Mbps,8Mbps,10M
bps,20Mbps,30Mbps
,40Mbps
<positive integer> 0/7
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
Available maxbitrate of smart stream
An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => VADP interface
Bit 1 => Capture video raw data
Bit 2 => Support encode jpeg
Bit 3 => Capture audio raw data
Bit 4 => Support event trigger
Bit 5 => Support license registration
Bit 6 => Support shared memory API
Bit 7 => Support digital signature of package
Bit 8 => Support snapshot
Indicate the maximum number of VADP
package that can be uploaded to the device.
Indicate whether to support thermal IC.
Indicate whether to support temperature
detection.
Indicate whether to support httptunnel.
Indicate whether to support "Manage
Privilege" of PTZ control in the Security page.
1: support both /cgi-bin/camctrl/camctrl.cgi
and /cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
Indicate whether to support HTTP tunnel for
UART transfer.
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless 802.11g.
Indicate whether to support wireless 802.11n.