Vivotek CC8370-HV User Manual page 199

tampering
tamperingmode
adaptiverecording
adaptivestreaming
supporttriggertypes
storage_dbenabled
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnection
protocol_maxgenconnecti
on
protocol_rtp_multicast_sc
alable
protocol_rtp_multicast_ba
ckchannel
protocol_rtp_tcp
<boolean> 0/7
tamper,toodark,toob 0/7
right,tooblurry
<boolean> 0/7
<boolean> 0/7
seq,boot,motion,net 0/7
workfail,recnotify,ta
mpering,vi,vadp,di,
volalarm,temperatu
re,pir, visignal,
backup
<product
dependent>
<boolean> 0/7
< boolean > 0/7
< boolean > 0/7
<boolean> 0/7
<positive integer> 0/7
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
Indicate whether to support tampering
detection.
Available tampering mode list
Indicate whether to support adaptive
recording.
Indicate whether to support adaptive
streaming.
list all the trigger types which are supported in
the camera:
"seq" = Periodic condition
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection failure
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger
"di"= Digital input
"volalarm" = Audio detection
"temperature" = Temperature detection
"pir" = PIR detection
"visignal" = Video input signal loss.
"backup" = Backing up recorded files
* Only available when [httpversion] >= 0301a
Media files are indexed in database.
Indicate whether to support HTTP over SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum number of allowed
simultaneous connections.
The maximum general streaming connections .
Indicate whether to support scalable multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
VIVOTEK
User's Manual - 199