Vivotek CC8370-HV User Manual page 176

VIVOTEK
profile_i0_lowlightmode
<product dependent>
profile_i0_dnr_mode
<product dependent>
profile_i0_dnr_strength
<product dependent>
profile_i0_defog_mode
<product dependent>
profile_i0_defog_strength
<product dependent>
profile_i0_eis
<product dependent>
profile_i0_scene_enable
<product dependent>
profile_i0_scene_mode
<product dependent>
176 - User's Manual
<boolean> 4/4
<boolean> 4/4
1~100 4/4
<boolean> 4/4
1~100 4/4
<boolean> 4/4
<boolean> 4/4
visibility, 4/4
noiseless,
...
100: Gamma value = 1
* Note: Although we set gamma value to 100
level, but not all gamma values are valid.
Internal module will take the closest valid one.
For example, 1~45 may all be mapped to
gamma value = 0.45, etc.
Enable/disable low light mode.
* Only available when
"capability_image_c<n>_lowlightmode" is 1
3D noise reduction.
0:disable
1:enable
* Only available when
"capability_image_c<n>_dnr" is 1
Strength of 3DNR
* Only available when
"capability_image_c<n>_dnr" is 1
Enable/disable defog mode.
0:disable
1:enable
* Only available when
"capability_image_c<n>_defog_mode" is 1
Strength of defog
* Only available when
"capability_image_c<n>_defog_mode" is 1
Electronic image stabilizer
0:disable
1:enable
* Only available when
"capability_image_c<n>_eis" is 1
Enable/disable scene mode
0: disable
1: enable
* Only available when
"capability_image_c<n>_scenemode_support
" is 1
Value of scene mode
* Only available when