Advanced Adapter Settings - HP StorageWorks FC1142SR Installation Manual

You can select the boot device as follows:
Enable Selectable Boot?
No
Yes
Yes
To enable the Selectable Boot option:
From the Configuration Settings menu, select Adapter Settings.
1.
2. Enable the HBA BIOS, and then press ESC to return to the Configuration Settings menu.
Use the menu as follows:
• Use the arrow keys to select Selectable Boot Settings.
• Press ENTER to enable or disable (toggle) the Selectable Boot option.
3. Move to the primary location of the Selectable Boot List menu.
Press ENTER to view a list of accessible devices (these are the devices in the Select Fibre
4.
Channel Device menu).
5. Using the arrow keys to select the device you want to add to the Selectable Boot List menu. Press
ENTER to select the device.
Repeat step 5

Advanced Adapter Settings

From the Configuration Settings menu in Fast!UTIL, select Advanced Adapter Settings.
lists the default settings for the HBA.
Table 6 Advanced Adapter Settings
Setting
Execution Throttle
Luns per Target
Enable LIP Reset
Enable LIP Full Login
Enable Target Reset
Login Retry Count
Port Down Retry Count
Link Down Timeout
28 Configuring the HBAs
Boot WWPN/LUN list
N/A (xxx appears)
Not specified
Specified
to specify up to three alternate boot devices.
Options
1–256
0, 8, 16, 32, 64, 128, 256
Yes, No
Yes, No
Yes, No
0–255
0–255
0–255
Boot device
BIOS configures the first disk drive it finds as
the boot device.
BIOS configures the first disk drive it finds that
is LUN 0 as the boot device.
BIOS scans the specified WWPN and LUN list
until it finds a disk drive. This drive is configured
as the boot device.
Default
16
128
No
Yes
Yes
8
16
8
Table 6