Basic Recording - Canon Legria FS20 Instruction Manual

Basic Recording

Shooting Video
1
Set the camera mode dial to
.
2
Turn on the camcorder.
/
the memory to be used for recording
movies (
3
Start/Stop
Press
recording.
• Recording starts; press
again to pause the recording.
Downloaded From VideoCamera-Manual.com Manuals
Video
This chapter covers functions related to shooting movies, including
recording, playback, and memory operations.
/ You can select
29).
to begin
Start/Stop
• You can also press
the LCD panel.
W
HEN YOU HAVE FINISHED RECORDING
1 Make sure that the ACCESS
indicator is off.
2 Turn off the camcorder.
3 Close the LCD panel.
( 23)
IMPORTANT
Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss or damage to the memory.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the operating mode.
NOTES
• About the Power Save mode: To save power
when the camcorder is powered by a
battery pack, the camcorder will
or
automatically shut off if left without any
operations for 5 minutes (
• When recording in bright places it may
be difficult to use the LCD screen.
Conversely, when recording in dark
places, the LCD panel may be a
nuisance to others nearby. In such
cases, change the brightness of the
LCD screen accordingly (
START/STOP
to turn on the camcorder.
on
87). Press
21, 86).
31