Using An External Microphone - Canon Legria FS20 Instruction Manual

Video
appears.
T
O ADJUST THE VOLUME OF THE
HEADPHONES
In mode, adjust the volume of the
headphones with the [PHONES VOL.]
setting ( 87). In
the headphone's volume the same way
you adjust the speaker's volume
( 35). During slideshow playback,
push the joystick (
volume.
IMPORTANT
• When using headphones, make sure to
lower the volume to an appropriate
level.
• Do not connect the headphones to the
AV OUT/ H terminal if the
not appear on the screen. Only noise
will be output in such case.
NOTES
• Use commercially available headphones
∅
with a 3.5 mm minijack and a cable
no longer than 3 m.
• Even if the AV OUT/ H terminal is set to
[ PHONES] during playback mode,
the setting will change to [
the operating mode is changed to
or mode.

Using an External Microphone

You can attach a commercially available
microphone for recording movies.
Downloaded From VideoCamera-Manual.com Manuals
52
mode, adjust
) to adjust the
icon does
AV] when
When recording in very quiet
surroundings, the built-in microphone
may pick up the sound of the
camcorder's internal machinery. In such
case, we recommend using an external
microphone.
Connecting a Microphone
Connect the external microphone to the
MIC terminal. Use commercially
available condenser microphones with
their own power supply and a cable no
longer than 3 m. You can connect
almost any stereo microphone with a
∅ 3.5 mm plug but audio recording
levels may vary.
IMPORTANT
Make sure to check the audio recording
level before recording with the external
microphone ( 85).
NOTES
When an external microphone is
connected to the camcorder,
[WIND SCREEN] will automatically be set
to [ OFF ].
( 23)