Comfort Version - Invacare Action 4NG series User Manual

The armrests with central fixation (n°1 & n°4) from now on
are equipped with a support adjustable (in 2 parts) which ena-
bles you to reduce the plays and to facilitate the vertical tube
extraction, it is necessary to tighten or loosen the 4 screws
(B) according to the anticipated result (photo 15).
- Swing-away, removable n°2 (photos 16 & 17)
This range of armrests can be swung away to facilitate
transfers and disassembling during transport.
To swing the armrest away, push down the dog point (A),
reverse the procedure to reinsert making sure that the dog
point (B) is properly engaged in its housing.
To remove the armrest, swing it back completely and pull it up.
Reverse the procedure to reinstall.
The new design includes handle (C) and hollowed skirt-guard
(D) to facilitate front transfer.
Grip firmly the armrest handle, take care of your nails on the
skirt-guard edges.
Push on your arms to easily lift yourself up and the attendant
can help you to finalise the transfer to the place where you
wish to sit.
C
A
B
D
16
17
In the event the armrest handle covers (C) become slippery,
it is recommended to request your dealer to replace them.
Refer to paragraph 1.2.2. Front transfer for safety instruc-
tions.When folding back down, ensure that it locks in place,
otherwise it can act as a long lever and could fatigue.
Note : the armrests are mounted in pairs on the wheelchair;
whenever you remove them, remember that you have a right
and a left side !
Never lift the wheelchair by the armrests !
Keep your fingers away from movable parts during folding,
disassembling or adjustment to prevent injuries !

2.1.6. Comfort version

The Action NG Comfort configuration (wheelchair for
4
passive user), needs a specific attachment kit to be fitted to
the chair so that the chair is safe to be used as a vehicle seat,
see paragraph 4.3.
The Comfort version is always delivered in passive position
(rear wheel support plate) for a better stability.
18
1
23