Invacare Action 4NG series User Manual page 33

- Dual handrim DHR (photos 32 & 33):
This new quick release system allows the user to drive
the wheelchair with a single arm using two handrims on
the same wheel with 2 possible side positions of the small
handrim (right or left available).
1. The removable and interchangeable rear wheels facilitate
transport as well as change of the control side.To dismantle
the wheel, pull the button ( A ) and remove the wheel from
its support.
To prevent falls and injuries, it is essential that the but-
ton (A) is fully engaged providing perfect
locking of the rear wheels.
2. Two positions of the small handrim are possible to facili-
tate the propulsion:
1) internal position
2) external position
32
A C B
B
33
Unscrew the three fixation bolts (B), position the small
handrim depending on the needed configuration, firmly
tighten the three bolts.
To fold the wheelchair, take the transmission shaft (C) off by
sliding one part inside the other.
To facilitate this operation move the small handrim forwards
to backwards.You can now roll the folded wheelchair.
Please note that the transmission shaft is an integral part
of the wheelchair and the user will be
unable to propel the wheelchair without it.
31