Marksman X11 Owner's Manual page 20

Programming of the LCD Transmitter
Stop the Trigger Melody
While triggering the alarm, the LCD screen will alert the user through melody sound and flashing
trigger icon. Press any button on the transmitter to stop melody sound only.
Button Lock
Use this mode to disable the transmission function of the remote control temporarily to prevent
any inadvertent pressing of buttons.
1. Press the "SET" button first, within 3 seconds press and hold the
activate or cancel the button lock function. The
to show button lock mode.
Vibration/Melody Mode
This mode is useful when you are in a noisy place and it is difficult to hear the beep from the
remote. The LCD transmitter will vibrate if your security system has been activated.
Press the "SET" button first, within 3 seconds press the
the mode of vibrate/melody. The
Set-Up Fixed Count Down Timer
Press the "SET" button first, then within 3 seconds press and hold the
The LCD screen will show the
desired time.
Note: 1. The countdown periods are fixed at 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5
hours and 2 hours maximum.
Note: 2. Press the SET button for a real time indication of the remaining time left.
Note: 3. When the display is showing 0:00, the timer is off
Out of Range Indication
1. If the transmitter is within range, the
2. If you are out of range, the
times.
20
icon will be displayed on the LCD screen to show mode.
icon and timer (0:10). Press the
icon will display on the LCD screen.
icon will disappear from LCD Screen and transmitter will beep 5
button for 2 seconds to
icon will be displayed on the LCD screen
( ) button for 2 seconds to select
button for 2 seconds.
button again to choose the