Protect Your Hearing; Installation Applications; Planning Your Installation; Serial Number - JL Audio MHD600/4-24V Owner's Manual

4-channel class-d full-range marine amplifier
Table of Contents

Advertisement

Protect Your Hearing!

We value you as a long-term customer. For
that reason, we urge you to practice restraint in
the operation of this product so as not to damage
your hearing and that of others in your vessel.
Studies have shown that continuous exposure to
high sound pressure levels can lead to permanent
(irreparable) hearing loss. This and all other
high-power amplifiers are capable of producing
such high sound pressure levels when connected
to a speaker system. Please limit your continuous
exposure to high volume levels.
While driving, operate your audio system in
a manner that still allows you to hear necessary
noises to operate your vessel safely (horns,
sirens, etc.).

serial number

In the event that your amplifier requires
service or is ever stolen, you will need to have
a record of the product's serial number. Please
take the time to enter that number in the space
provided below. The serial number can be found
on the bottom panel of the amplifier and on the
amplifier packaging.
Serial Number:
2 | JL Audio - MHD600/4-24V Owner's Manual

installation aPPlications

This amplifier is designed for operation in
vessels with 24 volt, negative-ground electrical
systems. Use of this product in vessels with
positive ground and/or voltages other than 24V
may result in damage to the product and will void
the warranty.
This product is not certified or approved for
use in aircraft.
Do not attempt to "bridge" the outputs of this
amplifier with the outputs of a second amplifier,
including an identical one.

Planning Your installation

It is important that you take the time to read
this manual and that you plan out your
installation carefully. The following are some
considerations that you must take into account
when planning your installation.
Power Status
Indicator
(pg. 16)
Filter Mode
Selection
(pg. 11)
Chassis Ground
Front Left & Right
Connector
Channel Input Jacks
(pgs. 6-7)
+24 V Power
Remote Turn-On
Connector
Connector
(pgs. 6-7)
(pgs. 6-7)
Ground
Remote
Front
Filter Slope
Input Sensitivity
Selection
Control
(pg. 11)
(pg. 10)
Filter Frequency
Selector
(pg. 11)
Left & Right Preamp
Output Jacks
(pg. 9)
(pg. 13)
Rear Left & Right
Channel Input Jacks
(pg. 9)
L
Inputs
Rear
R
Input Mode
Selection
(pg. 9)
Input Voltage
Selection
(pg. 10)
Jack for
Remote Level
Control Knob
(pg. 13)
L
Preouts
Remote
Level
Control
R

Advertisement

Table of Contents
loading

Table of Contents