Operating Modes; Sw18 - ProAudio SW18 User Manual

Operating Modes

[1] SW18:

Front
DELTA 8.4-DSP / 14.4-DSP [SW18]
Both SW18 subwoofers are wired using 4-pole speaker cables.
One amplifier channel will be assigned. Pin pair 1 may be used for tops.
Front
DELTA 14.4-DSP [SW18]
All three SW18 subwoofers are wired using 4-pole speaker cables.
One amplifier channel will be assigned. Pin pair 1 can be used for tops.
Front
DELTA 8.4-DSP / 14.4-DSP – 2 x 2-pc Sub Array [SW18 – 2 CH]
All four SW18 subwoofers are wired using 4-pole speaker cables. Two
subwoofers on either side are each driven by one dedicated amplifier
channel. Two amplifier channels will be assigned.
Front
DELTA 14.4-DSP – 2 x 3-pc Sub Array [SW18 - 2 CH]
All six SW18 subwoofers are wired using 4-pole speaker cables. Three
subwoofers on either side are each driven by one dedicated amplifier channel.
Two amplifier channels will be assigned.
Front
Front
5