Mercedes-Benz CLK 320 Operator's Manual page 64

Tighten the lap portion to a snug fit by pulling shoulder
portion up.
The shoulder portion of the seat belt must be pulled
snug and checked for snugness immediately after
engaging it.
Adjust seat belt so that shoulder portion is located as
close as possible to the middle of your shoulder (it
should not touch the neck).
Restraint systems
Instruments
Operation
and controls
P91.40-2102-26
Instrument
Driving
cluster display
Unfastening of seat belts
3
2
Push the release button (3) in the belt buckle (2). Allow
the retractor to completely rewind the seat belt by
guiding the latch plate (1).
Operation
The inertia reel stops the belt from unwinding during
sudden vehicle stops or when quickly pulling on the
belt. The locking function of the reel may be checked by
quickly pulling out the belt.
61
Practical hints Car care
1
Technical
data
Index