Mercedes-Benz CLK 320 Operator's Manual page 137

Instruments
Operation
and controls
Audio system
Scan tuning
high signal strength. The second scan will tune every
receivable station. By pressing either the
or buttons, or the "SC" key the scan mode
can be cancelled.
Station memory
(WB) channels 1 to 7 can be retrieved via the alpha-
numeric keypad and are preset at the factory.
Instrument
Driving
cluster display
Press the SC key. Each strong
receivable station on the band
selected will be tuned in for
8 seconds. The first scan will
tune only the stations with a
, ,
Ten stations can be stored in
the AM and FM bands via the
alpha-numeric keypad. The
"0" button corresponds to
location 10. Weatherband
Practical hints Car care
134
Storing stations
Hold the number button down for approximately
2 seconds. The currently displayed frequency is stored
on the selected station button. The storage procedure is
confirmed by a short signal tone.
Retrieving a station from memory
Press the desired station button.
Direct frequency input (AM and FM only)
frequency ranges (frequencies specified on page 133)
will not be accepted. The frequency input mode is
cancelled if no button is pressed within 4 seconds.
Technical
data
Select the band. Press the
" button and enter the
desired frequency using the
alpha-numeric keypad.
Frequencies outside of the
Index