Setting The Clock - Pioneer S-DV323 Operating Instructions Manual

03 Getting started
3 Use the
to select either 'Wide screen (16:9)' or
'Standard size screen (4:3)' according to the
kind of TV you have, then press ENTER.
See also Screen sizes and disc formats on
page 68 if you're not sure which one to choose.
Let's Get Started Menu Let's Get Started Menu
4 Press ENTER again to finish setting up.
Let's Get Started Menu
• Use the (cursor right) button to select
Back then press ENTER if you want to go
back and change the setting you just
made.
Tip
• You can also use the function buttons
(DVD/CD, TUNER, etc.) or the
CLOSE button to switch the system on
from standby.
14
En
(cursor left/right) buttons
What kind of TV do you have? What kind of TV do you have?
Use the Use the / / cursor buttons cursor buttons
to choose, then press [ENTER] to choose, then press [ENTER]
Wide screen (16:9) Wide screen (16:9) Standard size screen (4:3) Standard size screen (4:3)
Setup complete
If you're finished setting up,
choose [Complete],
to start again choose [Back]
Complete Back
OPEN/

Setting the clock

Setting the clock allows you to use the timer
features.
DVD MENU RETURN
TUNE+
ST– ST+
ENTER ENTER
TUNE–
MUTE SOUND
MASTER
VOLUME
TV CONTROL
CH INPUT VOL
1 Press TIMER/CLOCK.
• If you are adjusting the clock, rather then
setting it for the first time, press TIMER/
CLOCK again.
2 If 'Clock ADJ?' isn't already showing in
the display, press
right) until you see it.
3 Press ENTER.
4 Use the (cursor up/down) buttons
to set the hour.
5 Press ENTER.
6 Use the (cursor up/down) buttons
to set the minute.
7 Press ENTER to confirm.
The display flashes to indicate the clock is set.
Tip
• Press TIMER/CLOCK anytime to display
the clock.
Note
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
BASS MODE DIALOGUE DIALOGUE VIRTUAL SB CH LEVEL
SURROUND SURROUND ADVANCED VIRTUAL SB ADVANCED
PROGRAM REPEAT RANDOM
AUDIO SUBTITLE ANGLE
HOME
ZOOM TOP MENU MENU
1 2 3
QUIET/
SYSTEM
TEST TONE MIDNIGHT
SETUP
4 5 6
TIMER/ TIMER/
DIMMER DISPLAY CLOCK CLOCK
7 8 9 9
SR+ FOLDER– FOLDER+
0
ENTER
CLR
ROOM SETUP
MAIN SUB SUB
or (cursor left or