Adjusting The Advanced And Front Surround Effect Level; Listening In Stereo; Listening With Headphones - Pioneer S-DV323 Operating Instructions Manual

04 Listening to your system
If you have selected Frt. Movie or Frt. Music,
you will achieve best results by turning each
surround speaker about 50º towards the
closest wall. With ExtraPower, orient the
surround speakers in the same direction as the
front speakers (towards the listening position).
50º
Frt. Movie / Frt. Music
• When turning, you will feel the surround
speaker snap correctly into place. Do not
force the speaker to turn past this point.
Adjusting the Advanced and Front
Surround effect level
You can emphasize or reduce the effect of the
Advanced and Front Surround modes as you
like. You can set the effect level for all modes
independently.
1 With one of the Advanced or Front
Surround modes active, press SOUND.
2 Use the
to select 'Effect'.
3 Use the
to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
4 Press ENTER to confirm.
26
En
Extra Power
(cursor left/right) buttons
(cursor up/down) buttons

Listening in stereo

You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwoofer.
BASS MODE DIALOGUE
SURROUND ADVANCED
PROGRAM
AUDIO
ZOOM
1
SYSTEM
TEST TONE
SETUP
4
DIMMER
7
SR+
CLR
MAIN
• Press SURROUND repeatedly until
'Stereo' shows in the display.
Any active Advanced or Front Surround mode
is canceled.

Listening with headphones

When headphones are connected, only the
Stereo (default) and Phones Surround (virtual
surround sound for headphones) modes are
available.
When you disconnect them it reverts to the
previous mode.
• With headphones connected, press
ADVANCED or FRONT SURROUND to select
'Phones Surround' or SURROUND to select
'Stereo'.
DIALOGUE CH LEVEL
VIRTUAL SB
REPEAT RANDOM
SUBTITLE ANGLE
HOME
TOP MENU MENU
2 3
QUIET/
MIDNIGHT
5 6
TIMER/
DISPLAY CLOCK
8 9
FOLDER– FOLDER+
0
ENTER
ROOM SETUP
SUB SUB