Troubleshooting - CableTronix CT-HDVD-EXT-IR230 User Manual

Troubleshooting

1: Why is the Power indicator off?

Check that all the devices are powered on.

Check that all the cables are qualified and connected properly.
2: Why is the Link indicator off or blinking?

Check that all of the devices are powered on.

Check that all of the cables are qualified and connected properly.

Check that the length of Cat5e/Cat6 is appropriate. For more
information, see cable requirements under specification charts.

Check that the Transmitter and Receiver work properly.
3: Why does the display connected to the Receiver not show any picture?

Check that power supplies of all the devices are powered on.

Check that all the cables are qualified and connected properly.

Check that the display works properly, and that source devices have
normal signals outputs.

Check that no compatibility issues exist between the Receiver and
display. If so, attempt testing with a different model of display.
www.nacebrands.com
18
www.cabletronix.com