Table of Contents
Advertisement
A
NEUVIDEO
AUTO FADE/WIPE Selection
Reset the operation panel to initial mode:
q →
Press the ON button to enter into AUTO FADE/WIPE mode.
w →
FADE/WIPE transition time can be adjusted with the TIME control
e →
Press the WIPE button
r →
Press the MIx button
NOTE: When in AUTO FADE/WIPE mode the Video Slider
DIGITAL EFFECT
Digital effect section which generates digital special effects for the A-bus and B-bus source
video signals. The selected effect(s) can be added to either the A-bus or B-bus at one time.
NOTE: The mosaic effect is not available in the picture-in-picture frame in PIP mode.
/
A-bus, B-bus digital effect ON button.
1*
2#
/
STILL button - creates a still frame.
1(
2$
/
PAINT button - creates a 'paint' effect. Repeatedly pressing the PAINT button will
2)
2%
cycle through (3) levels of the effect.
/
NEGATIVE button - creates a negative image.
2!
2^
/
MOSAIC button - creates a 'pixillated' effect. Repeatedly pressing the MOSAIC
2@
2&
button will cycle through (3) levels of the effect.
AUDIO MIXER
The Audio can be controlled either separately or in
combination with a video source.
When the AUDIO FOLLOW's LED illuminate the Audio
3!
may be adjust by Video slider
When the LED is off the Audio will be adjusted by
buttons.
3%
Adjusts the A-bus source's audio level.
3$
Adjusts the B-bus source's audio level.
3%
AUX: Controls the audio level of the auxiliary input.
3^
MIC: Controls the audio level of the microphone input.
3&
d
to select the wipe effect.
g
to select MIx (FADE) effect.
along with the video.
5@
3$
q
.
is disabled.
5@
and
15
OPERATION
Advertisement
Table of Contents
