Magnadyne PL10S Owner's Manual

Keyless entry/convenience system

Table of Contents

Download this manual

Keyless Entry/Convenience System

OWNER'S

MANUAL

Model: PL10S

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference; and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

Table of Contents

Need help?

Do you have a question about the PL10S and is the answer not in the manual?

Page 1 (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. © Copyright 1999 Magnadyne Corp.
Page 2 The information enclosed will provide a ready reference of the operation and maintenance of your new keyless entry/convenience system. Remote Control Transmitters LOCK/UNLOCK \PANIC Button Keyless Entry System Operation: Proper operation of the keyless entry function will require the use of the remote control transmitter to lock and unlock the doors.
Page 3 Remote Panic To activate the panic feature: Depress and hold the LOCK/UNLOCK/PANIC button for more than 3 seconds. 1. The chirper or horn will begin sounding when the panic feature is activated. 2. On your remote transmitter press the LOCK/UNLOCK/PANIC button to turn off the panic feature.
Page 4 Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.