Energy Management; At The End Of The Program - Miele G 6590 Operating Instructions Manual

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes af‐
ter the last time a button has been
pressed or after the end of the program
(see "Settings menu - Optimize stand‐
by").
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
while a program or the FlexiTimer is
running or if there is a fault.

At the end of the program

At the end of a program, the Optical In‐
terface will be visible flashing slowly
with the door shut. The buzzer might al‐
so be sounding.
The program has finished when 
appears in the display and the door has
opened slightly (if applicable).
The drying fan may continue to run for
a few minutes at the end of the pro‐
gram.
You can now empty the dishwasher.
The Optical Interface will go out 10 mi‐
nutes after the end of the program if the
door is closed.

If you have deactivated the auto‐
matic door opening function (see
"Settings menu - AutoOpen"), but
would still like to open the door at
the end of the program, make sure
that you open the door fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
counter because the fan is no longer
running.
Operation
End
47