Page 1
Christie Vive Audio LA5 Speaker U s e r M a n u a l 020-101264-02...
Page 3
Christie Vive Audio LA5 Speaker U s e r M a n u a l 020-101264-02...
Page 4
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Page 5
Addendum Translated copies of this document are provided on the CD in the back of this document. The CD may also contain additional product documentation. Read all instructions before using or servicing this product. 本 文档 的翻译副本在本文档背面的 C D 上提 供。 该 CD 中还 可能 包含 其他 产品 文 档...
Observe load ratings and all applicable local safety codes. • Only use attachments or accessories specified by Christie. • To reduce the risk of system damage, turn off the power amplifier and then disconnect the speaker wire before performing a repair or maintenance.
What’s in the box? This table lists the components that are shipped with the LA5. Quantity Description Part number Christie LA5 speaker 145-122106-XX Christie LA5 speaker with grill 145-123107-XX Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker. Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations. Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
Page 12
3. Connect the negative and positive speaker wires from the speaker to the corresponding terminals on the amplifier. 4. Turn on the amplifier and verify that the speaker is receiving power. Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
The LA5 is mounted to the S215 subwoofers with the BKL-LA4 or BKL-LA5 bracket kit. For mounting instructions see the Christie Vive Audio BKL-LA4 Bracket User Manual Christie Vive Audio BKL-LA5 Bracket User Manual. Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
2. Attach the following bracket to the back of the speaker using the four M8 button head screws. Description Part number Wall mount bracket (MM-120) 111-693200-XX 3. Mount the speaker to the wall using the manufacturer documentation provided with the bracket. Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
Page 17
Installation LA5 speaker Wall mount bracket Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
• Reroute audio cables away from AC power and lighting cables. • Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers. • Check the polarity. Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
103.5 dB (mid-frequency), 102 dB (high-frequency) Sensitivity , 1 W/1 m Recommended amplifier power 1500 W - 2150 W (FTC) @ 4 Ohms / Christie CDA3 or Christie CDA5 (depending on application) Rated impedance Mid-frequency: 4 Ohms High-frequency: 3 Ohms (linear impedance through entire audio band) Measured at distances of 4m and 8m, in free field and on ground plane.
188.8 cm x 26.8 cm x 40 cm (74.3 in.) x (10.6 in.) x (15.7 in.) Weight (net) 53 kg (117 lb) Parts Specification Part Number 6.5 in. woofer 003-121023-XX 6 in. ribbon driver 003-121021-XX Christie Vive Audio LA5 Speaker User Manual 020-101264-02 Rev. 1 (04-2015)
Need help?
Do you have a question about the Vive Audio LA5 and is the answer not in the manual?
Questions and answers