Page 1
Christie Vive Audio LA3S Speaker U s e r M a n u a l 020-101270-02...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Observe load ratings and all applicable local safety codes. • Only use attachments or accessories specified by Christie. • To reduce the risk of system damage, turn off the power amplifier and then disconnect the speaker wire before performing a repair or maintenance.
This table lists the components that are shipped with the LA3S. Quantity Description Part number Christie LA3S line array surround speaker 145-113106-XX Christie LA3S line array surround speaker with grill 145-114107-XX Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker. Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations. Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
Wall mount bracket (MM-017) 111-694201-XX Wall mount bracket (MM-024) 111-681207-XX Wall mount bracket (MM-060) 111-682208-XX 3. Mount the speaker to the wall using the manufacturer documentation provided with the bracket. Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
Page 9
Installation LA3S speaker Wall mount bracket Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
Verify that the negative and positive speaker wires from the speaker are securely connected to the terminals on the amplifier. • Verify that there are no missing screws. Replace all screws that you removed during installation. Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
Reroute audio cables away from AC power and lighting cables. • Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers. • Check the polarity. Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
92.5 dB Sensitivity , 1 W/1 m Recommended amplifier power 450 W - 825 W (FTC) at 8 Ohms / Christie CDA3 or Christie CDA5 (depending on application) Rated impedance 8 Ohms Measured at distances of 4 m and 8 m, in free field and on ground plane. Sensitivity is calculated based on the measured SPL response averaged in the 200 Hz-3 kHz range and scaled back to 1 m.
55.6 cm x 23.8 cm x 27.1 cm (21.9 in.) x (9.4 in.) x (10.7 in.) Weight (net) 10 kg (22 lb) Parts Specification Part Number 5.25 in. woofer 003-120885-XX TWTR Bridge Kapton 003-121031-XX Christie Vive Audio LA3S Speaker User Manual 020-101270-02 Rev. 1 (07-2017)
Need help?
Do you have a question about the Vive Audio LA3S and is the answer not in the manual?
Questions and answers