Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Christie Vive Audio LA3Si
Summary of Contents for Christie Vive Audio LA3Si
- Page 1 User Guide 020-103168-01 Vive Audio LA3Si Speaker...
- Page 2 The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
-
Page 3: Table Of Contents
Wall mounting the LA3Si speaker......... 7 Using the BKTW-LSXS bracket with Christie loudspeakers......8 Available safety cables. -
Page 4: Introduction
Introduction The Christie LA3Si line array surround speaker is designed for auditoriums with approximately 250 to 350 seats. It may also be paired with S115 or S215 subwoofers and bi-amped to create a surround system with bass management. It may also be used for a range of other applications, where vertical coverage and maximum throw distance are appropriate. -
Page 5: Operation Safety
Always turn off and disconnect the amplifiers from power before making audio connections or servicing a speaker. • Any changes to the product not approved by Christie will void the warranty. Permissible sound pressure level limits Exposure to extremely high noise levels may cause permanent hearing loss. -
Page 6: Cleaning Products
Introduction Cleaning products Clean the components with the following Christie approved products. • Clean, dry, microfiber cloth Included components This table lists the components that are shipped with the LA3Si speaker. Quantity Description Part number Christie LA3Si line array surround speaker... -
Page 7: Installation
2. Attach one of the following brackets to the back of the speaker using the four M8 button head screws. • Wall tilt bracket BKTW-LSxS (P/N: 145-179108-XX) • Wall mount bracket MM-024 (P/N: 111-681207-XX) Vive Audio LA3Si Speaker User Guide 020-103168-01 Rev. 1 (07-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©... -
Page 8: Using The Bktw-Lsxs Bracket With Christie Loudspeakers
After a minor field modification is performed, the bracket can be safely used with this model. When installing Christie Vive Audio speakers and speaker mounting brackets, use a backup safety system such as a prefabricated safety cable. Warning! If not avoided, the following could result in death or serious injury. -
Page 9: Available Safety Cables
When choosing safety cables, always consult a qualified professional. The type of cable required is based on the speaker model, speaker mount, and installation specifications. Do not use the backup safety cables as a primary suspension device. The following cables are available to purchase from Christie: • 18 in safety cable SC-018-BC (P/N: 003-006320-XX) •... -
Page 10: Troubleshooting
Troubleshooting For assistance with common issues, refer to the following troubleshooting topics. If you cannot resolve your issue with the information provided, contact Christie Technical Support. The speaker does not function The speaker is connected to the amplifier, but is not producing any sound. -
Page 11: There Is Audible Noise From Speaker
• Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com • Asia Pacific: +65 6877-8737 or Support.APAC@christiedigital.com Vive Audio LA3Si Speaker User Guide 020-103168-01 Rev. 1 (07-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©... -
Page 12: La3Si Speaker Specifications
Sensitivity , 1 W/1 m 97 dB Recommended amplifier power 400 W - 800 W (FTC) at 3 Ohms / Christie CDA3 or Christie CDA5 (depending on application) Rated impedance 3 Ohms Measured at distances of 4 m and 8 m, in free field and on ground plane. Sensitivity is calculated based on the measured SPL response averaged in the 300 Hz-4 kHz range and scaled back to 1 m. -
Page 13: Power Requirements
Ceiling mount (MM-3RDX-18) 111-683209-XX SpeakON Connector (for amplifier output to speaker) 145-158105-XX #8 Spade Lug (for speaker input from amplifier) 145-159106-XX Vive Audio LA3Si Speaker User Guide 020-103168-01 Rev. 1 (07-2019) Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved. ©... - Page 14 Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa United Kingdom Columbia Korea (Seoul) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000 ph: +57 (318) 447 3179 ph: +82 2 702 1601 Christie Digital Systems Canada Inc.
Need help?
Do you have a question about the Vive Audio LA3Si and is the answer not in the manual?
Questions and answers