Page 1
Christie Vive Audio LA3 Speaker U s e r M a n u a l 020-101407-02...
Page 3
Christie Vive Audio LA3 Speaker U s e r M a n u a l 020-101407-02...
Page 4
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Page 5
Addendum Translated copies of this document are provided on the CD in the back of this document. The CD may also contain additional product documentation. Read all instructions before using or servicing this product. 本 文档 的翻译副本在本文档背面的 C D 上提 供。 该 CD 中还 可能 包含 其他 产品 文 档...
Observe load ratings and all applicable local safety codes. • Only use attachments or accessories specified by Christie. • To reduce the risk of system damage, turn off the power amplifier and then disconnect the speaker wire before performing a repair or maintenance.
What’s in the box? This table lists the components that are shipped with the LA3. Quantity Description Part number Christie LA3 speaker 145-102104-XX Christie LA3 speaker with grill 145-125109-XX Christie Vive Audio LA3 Speaker User Manual 020-101407-02 Rev. 1 (04-2015)
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the speaker. Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug terminations. Christie Vive Audio LA3 Speaker User Manual 020-101407-02 Rev. 1 (04-2015)
The LA3 is mounted to the S215 subwoofer with the BKL-LA3 bracket kit. For mounting instructions see the Christie Vive Audio BKL-LA3 Bracket User Manual. S215 subwoofer BKL-LA3 bracket (1 of 2) LA3 speaker Christie Vive Audio LA3 Speaker User Manual 020-101407-02 Rev. 1 (04-2015)
2. Attach the following bracket to the back of the speaker using the four M8 button head screws. Description Part number Wall mount bracket (MM-120) 111-693200-XX 3. Mount the speaker to the wall using the manufacturer documentation provided with the bracket. LA3 speaker Wall mount bracket Christie Vive Audio LA3 Speaker User Manual 020-101407-02 Rev. 1 (04-2015)
• Reroute audio cables away from AC power and lighting cables. • Verify correct gain structuring of B Chain and input and output levels of source devices and amplifiers. • Check the polarity. Christie Vive Audio LA3 Speaker User Manual 020-101407-02 Rev. 1 (04-2015)
96.5 dB Sensitivity , 1 W/1 m Recommended amplifier power 830 W - 1500 W (FTC) at 4 Ohms / Christie CDA3 or Christie CDA5 (depending on application) Rated impedance 4 Ohms Measured at distances of 4m and 8m, in free field and on ground plane. Sensitivity is calculated based on the measured SPL response averaged in the 200 Hz-3 kHz range and scaled back to 1m.
37 kg (82 lb) Parts Specification Part Number 5.25 in. woofer 003-120885-XX Top tweeter bridge 003-1211027-XX (LA3 145-102104-01 only) or 003-121029-XX Bottom tweeter bridge 003-1211028-XX (LA3 145-102104-01 only) or 003-121030-XX Christie Vive Audio LA3 Speaker User Manual 020-101407-02 Rev. 1 (04-2015)
Need help?
Do you have a question about the Vive Audio LA3 and is the answer not in the manual?
Questions and answers